Material – ASTM B 344 Ni60-Cr16
Standard Specification for Drawn or Rolled Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating Elements
Group - Non-Ferrous Nickel Alloys
Sub Group - ASTM B 344 Ni60-Cr16 Drawn or Rolled Nickel-Chromium and Nickel-Chromium-Iron Alloys for
Electrical Heating Elements
Application - Intended for Valve, Pump, General Engineering, Automotive and other Industries
Grade Belongs to the Industry - Wire & Strip with Hot & Cold Rolled
| Chemical Composition | ||
|---|---|---|
| Carbon | C % | 0.150 max. |
| Silicon | Si % | 0.750 - 1.750 |
| Manganese | Mn % | 1.000 max. |
| Chromium | Cr % | 14.000 - 18.000 |
| Sulphur | S % | 0.010 max. |
| Nickel | Ni % | 57.000 min. |
| Iron | Fe % | Balance |
| - | - | - |
| - | - | - |
| - | - | - |
| - | - | - |
| - | - | - |
| - | - | - |
| - | - | - |
| - | - | - |
| Heat Treatment |
|---|
| As-Cast or Annealing or Age Hardning |
| Mechanical Properties | |
|---|---|
| Tensile Strength in Mpa | - |
| Yield Strength in Mpa | - |
| Elongation in % | 10 min. |
| Reduction of Area in % | - |
| Hardness in BHN | - |
| Impact in Joule | - |
Cross Reference Table
| Material | Standard | Country | Grade Belong to the Industry |
|---|---|---|---|
| - | - | - | - |
| - | - | - | - |
| - | - | - | - |
| - | - | - | - |
| - | - | - | - |
| - | - | - | - |
| - | - | - | - |