Material – ASTM B 575 N06035
Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Alloy Plate, Sheet and Strip
Group - Non-Ferrous Nickel Alloys
Sub Group - ASTM B 575 N06035 Low-Carbon Nickel-Chromium-Molybdenum, Alloy Plate, Sheet and Strip
Application - Intended for Valve, Pump, General Engineering, Automotive and other Industries
Grade Belongs to the Industry - Plate, Sheet and Strip
| Chemical Composition | ||
|---|---|---|
| Carbon | C % | 0.050 max. |
| Silicon | Si % | 0.600 max. |
| Manganese | Mn % | 0.500 max. |
| Chromium | Cr % | 32.250 - 34.250 |
| Sulphur | S % | 0.015 max. |
| Molybdenum | Mo % | 7.600 - 9.000 |
| Phosphorus | P % | 0.030 max. |
| Tungsten | W % | 0.600 max. |
| Iron | Fe % | 2.000 max. |
| Cobalt | Co % | 1.000 max. |
| Aluminium | Al % | 0.400 max. |
| Copper | Cu % | 0.300 max. |
| Vanadium | V % | 0.200 max. |
| Nickel | Ni % | Balance |
| - | - | - |
| Heat Treatment |
|---|
| As-Cast or Annealing or Age Hardning |
| Mechanical Properties | |
|---|---|
| Tensile Strength in Mpa | 586 min. |
| Yield Strength in Mpa | 241 min. |
| Elongation in % | 30 min. |
| Reduction of Area in % | - |
| Hardness in HRC | 100 max. |
| Impact in Joule | - |
Cross Reference Table
| Material | Standard | Country | Grade Belong to the Industry |
|---|---|---|---|
| B 564 N06035 | ASTM | USA | Forging |
| B 574 N06035 | ASTM | USA | Rod |
| B 462 N06035 | ASTM | USA | Pipe Flanges, Forged Fittings and Valve |
| B 619 N06035 | ASTM | USA | Pipe |
| B 622 N06035 | ASTM | USA | Pipe and Tube |
| B 626 N06035 | ASTM | USA | Tube |
| B 472 N06035 | ASTM | USA | Billets and Bars |