Material – ASTM F2281 601
Standard Specification for Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws and Studs, for Heat Resistance and High Temperature Applications
Group - Non-Ferrous Nickel Alloys
Sub Group - ASTM F2281 601 Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws and Studs, for Heat Resistance
and High Temperature Applications
Application - Intended for Valve, Pump, General Engineering, Automotive and other Industries
Grade Belongs to the Industry - Bolts, Hex Cap Screws and Studs
| Chemical Composition | ||
|---|---|---|
| Carbon | C % | 0.100 max. |
| Silicon | Si % | 0.500 max. |
| Manganese | Mn % | 1.000 max. |
| Chromium | Cr % | 21.000 - 25.000 |
| Aluminium | Al % | 1.000 - 1.700 |
| Copper | Cu % | 1.000 max. |
| Sulphur | S % | 0.015 max. |
| Nickel | Ni % | 58.000 - 63.000 |
| Iron | Fe % | Balance |
| - | - | - |
| - | - | - |
| - | - | - |
| - | - | - |
| - | - | - |
| - | - | - |
| Heat Treatment |
|---|
| As-Cast or Annealing or Age Hardning |
| Mechanical Properties | |
|---|---|
| Tensile Strength in Mpa | 517 min. |
| Yield Strength in Mpa | 172 min. |
| Elongation in % | 35 min. |
| Reduction of Area in % | - |
| Hardness in BHN | 63 - 85 |
| Impact in Joule | - |
Cross Reference Table
| Material | Standard | Country | Grade Belong to the Industry |
|---|---|---|---|
| Inconel 601 | SAE | USA | Plate, Sheet and Strip |
| N06601 | UNS | USA | Plate, Sheet and Strip |
| NiCr23Fe15Al | JIS | Japan | Plate, Sheet and Strip |
| NW6601 | JIS | Japan | Plate, Sheet and Strip |
| NiCr23Fe15Al | KS | Korea | Wire |
| NW6601 | KS | Korea | Wire |
| B516 N06601 | ASTM | USA | Tube |