Material – EN 1.6220
Standard Specification for Steel Castings for General Engineering Purposes
Group - Ferrous Mild Steel Alloys
Sub Group - EN 1.6220 Steel Castings for General Engineering Purposes
Application - Intended for Valve, Pump, General Engineering, Automotive and Other Industries
Grade Belongs to the Industry - Casting
| Chemical Composition | ||
|---|---|---|
| Carbon | C % | 0.170 - 0.230 |
| Silicon | Si % | 0.600 max. |
| Manganese | Mn % | 1.000 - 1.600 |
| Phosphorus | P % | 0.020 max. |
| Sulphur | S % | 0.020 max. |
| Chromium | Cr % | 0.300 max. |
| Molybdenum | Mo % | 0.150 max. |
| Nickel | Ni % | 0.800 max. |
| Copper | Cu % | 0.300 max. |
| Vanadium | V % | 0.050 max. |
| Iron | Fe % | Balance |
| - | - | - |
| - | - | - |
| - | - | - |
| - | - | - |
| Heat Treatment |
|---|
| As Cast or Annealing or Normalizing or Hardening and Tempering |
| Mechanical Properties | |
|---|---|
| Tensile Strength in Mpa | 480 - 650 |
| Yield Strength in Mpa | 300 min. |
| Elongation in % | 20 min. |
| Reduction of Area in % | - |
| Hardness in BHN | - |
| Impact in Joule | 50 J @ RT |
Cross Reference Table
| Material | Standard | Country | Grade Belong to the Industry |
|---|---|---|---|
| AM2 | BS | British | Casting |
| 2074/C3 | AS | Australia | Casting |
| 1.622 | ONORM | Australia | Casting |
| 1.622 | BDS | Bulgaria | Casting |
| 1.622 | DIN | Germany | Casting |
| 1.622 | SS | Sweden | Casting |
| 1.622 | UNE | Spain | Casting |