Material – DIN 2.4668
Standard Specification for Strips and Sheets of Nickel and Nickel Alloys
Group - Non-Ferrous Nickel Alloys
Sub Group - DIN 2.4668 Strips and Sheets of Nickel and Nickel Alloys
Application - Intended for Valve, Pump, General Engineering, Automotive and other Industries
Grade Belongs to the Industry - Strip and Sheet
| Chemical Composition | ||
|---|---|---|
| Carbon | C % | 0.020 - 0.080 |
| Silicon | Si % | 0.350 max. |
| Manganese | Mn % | 0.350 max. |
| Chromium | Cr % | 17.000 - 21.000 |
| Cobalt | Co % | 1.000 max. |
| Copper | Cu % | 0.300 max. |
| Molybdenum | Mo % | 2.800 - 3.300 |
| Aluminium | Al % | 0.300 - 0.700 |
| Boron | B % | 0.006 max. |
| Nickel | Ni % | 50.000 - 55.000 |
| Phosphorus | P % | 0.015 max. |
| Sulphur | S % | 0.015 max. |
| Titanium | Ti % | 0.600 - 1.200 |
| Iron | Fe % | Balance |
| - | - | - |
| Heat Treatment |
|---|
| As-Cast or Annealing or Age Hardning |
| Mechanical Properties | |
|---|---|
| Tensile Strength in Mpa | 800 min. |
| Yield Strength in Mpa | 1030 min. |
| Elongation in % | 10 min. |
| Reduction of Area in % | 8 min. |
| Hardness in HB | 330 min. |
| Impact in Joule | 12 @RT |
Cross Reference Table
| Material | Standard | Country | Grade Belong to the Industry |
|---|---|---|---|
| - | - | - | 0 |
| - | - | - | - |
| - | - | - | - |
| - | - | - | - |
| - | - | - | - |
| - | - | - | - |
| - | - | - | - |