Material – DIN EN 1982 CC481K
Standard Specification for Copper and Copper Alloys - Ingots and Castings
Group - Non-Ferrous Copper Alloy
Sub Group - DIN EN 1982 Copper and Copper Alloys - Ingots and Castings
Application - Intended for Valve, Pump, General Engineering, Automotive and Other Industries
Grade Belongs to the Industry - Ingot and Casting
| Chemical Composition | ||
|---|---|---|
| Aluminium | Al % | 0.010 max. |
| Iron | Fe % | 0.100 max. |
| Manganese | Mn % | 0.050 max. |
| Nickel | Ni % | 0.100 max. |
| Phosphorus | P % | 0.500 - 1.000 |
| Lead | Pb % | 0.250 max. |
| Sulphur | S % | 0.050 max. |
| Antimony | Sb % | 0.050 max. |
| Silicon | Si % | 0.010 max. |
| Tin | Sn % | 10.000 - 11.500 |
| Zinc | Zn % | 0.050 max. |
| Cu + Ni | Cu%+Ni% 87.000 - 89.500 | Elongation in % |
| - | - | - |
| - | - | - |
| - | - | - |
| Heat Treatment |
|---|
| As-Cast |
| Mechanical Properties | |
|---|---|
| Tensile Strength in Mpa | 250 - 350 |
| Yield Strength in Mpa | 130 - 170 |
| 2 - 5 | - |
| Reduction of Area in % | - |
| Hardness in HB | 60 - 85 |
| Impact in Joule | - |
Cross Reference Table
| Material | Standard | Country | Grade Belong to the Industry |
|---|---|---|---|
| CB481K | BS | British | Ingot and Casting |
| CC481K | ONORM | Australia | Ingot and Casting |
| CC481K | AFNOR NF | France | Ingot and Casting |
| CC481K | BDS | Bulgaria | Ingot and Casting |
| CuSn11P-C | UNI | Italy | Ingot and Casting |
| CuSn11P-C | MSZ | Hungary | Ingot and Casting |
| CuSn11P-C | UNE | Spain | Ingot and Casting |