Material – DIN EN 1982 CC767S
Standard Specification for Copper and Copper Alloys - Ingots and Castings
Group - Non-Ferrous Copper Alloy
Sub Group - DIN EN 1982 Copper and Copper Alloys - Ingots and Castings
Application - Intended for Valve, Pump, General Engineering, Automotive and Other Industries
Grade Belongs to the Industry - Ingot and Casting
| Chemical Composition | ||
|---|---|---|
| Aluminium | Al % | 0.100 - 0.800 |
| Iron | Fe % | 0.500 max. |
| Manganese | Mn % | 0.500 max. |
| Nickel | Ni % | 1.000 max. |
| Lead | Pb % | 0.100 max. |
| Silicon | Si % | 0.200 max. |
| Tin | Sn % | 0.100 max. |
| Cu + Ni | Cu%+Ni% 59.000 - 64.000 | - |
| Zinc | Zn % | Balance |
| - | - | - |
| - | - | - |
| - | - | - |
| - | - | - |
| - | - | - |
| - | - | - |
| Heat Treatment |
|---|
| As-Cast |
| Mechanical Properties | |
|---|---|
| Tensile Strength in Mpa | 380 min. |
| Yield Strength in Mpa | 130 min. |
| Elongation in % | 30 min. |
| Reduction of Area in % | - |
| Hardness in HB | 75 min. |
| Impact in Joule | - |
Cross Reference Table
| Material | Standard | Country | Grade Belong to the Industry |
|---|---|---|---|
| CB767S | BS | British | Ingot and Casting |
| CC767S | ONORM | Australia | Ingot and Casting |
| CC767S | BDS | Bulgaria | Ingot and Casting |
| CC767S | CSN | Czech Republic | Ingot and Casting |
| CuZn38Al1-C | AFNOR NF | France | Ingot and Casting |
| CuZn38Al1-C | EN | European Union | Ingot and Casting |
| CuZn38Al1-C | MSZ | Hungary | Ingot and Casting |