Material – DIN EN 12844 ZP1110 I ZP12
Standard Specification For Zinc and Zinc Alloy Castings
Group - Non-Ferrous Zinc Alloys
Sub Group - DIN EN 12844 ZP1110 I ZP12 Zinc and Zinc Alloy Castings
Application - Intended for Valve, Pump, General Engineering, Automotive and Other Industries
Grade Belongs to the Industry - Casting
| Chemical Composition | ||
|---|---|---|
| Aluminium | Al % | 10.500 - 11.500 |
| Copper | Cu % | 0.500 - 1.200 |
| Magnesium | Mg % | 0.015 - 0.030 |
| Lead | Pb % | 0.006 max. |
| Cadmium | Cd % | 0.006 max. |
| Tin | Sn % | 0.003 max. |
| Iron | Fe % | 0.070 max. |
| Nickel | Ni % | 0.020 max. |
| Silicon | Si % | 0.060 max. |
| Zinc | Zn % | Balance |
| - | - | - |
| - | - | - |
| - | - | - |
| - | - | - |
| - | - | - |
| Heat Treatment |
|---|
| As-Cast |
| Mechanical Properties | |
|---|---|
| Tensile Strength in Mpa | 400 min. |
| Yield Strength in Mpa | 300 min. |
| Elongation in % | 5 min. |
| Reduction of Area in % | - |
| Hardness in HB | 100 min. |
| Impact in Joule | 30 J @ RT |
Cross Reference Table
| Material | Standard | Country | Grade Belong to the Industry |
|---|---|---|---|
| ZnAl11Cu1 | UNE | Spain | Ingot |
| B 240 ZA12 | ASTM | USA | Ingot and Casting |
| - | - | - | - |
| - | - | - | - |
| - | - | - | - |
| - | - | - | - |
| - | - | - | - |