Material – ASTM A 753 Type 4
Standard Specification for Nickel-Iron Soft Magnetic Alloys
Group - Non-Ferrous Nickel Alloys
Sub Group - ASTM A 753 Type 4 Nickel-Iron Soft Magnetic Alloys
Application - Intended for Valve, Pump, General Engineering, Automotive and other Industries
Grade Belongs to the Industry - Forging, Billet, Hot rolled plate, Strip, Bar and Wire
| Chemical Composition | ||
|---|---|---|
| Carbon | C % | 0.050 max. |
| Silicon | Si % | 0.500 max. |
| Manganese | Mn % | 0.800 max. |
| Chromium | Cr % | 0.300 max. |
| Sulphur | S % | 0.010 max. |
| Molybdenum | Mo % | 3.500 - 6.000 |
| Phosphorus | P % | 0.020 max. |
| Cobalt | Co % | 0.500 max. |
| Copper | Cu % | 0.300 max. |
| Nickel | Ni % | 79.000 - 82.000 |
| Iron | Fe % | Balance |
| - | - | - |
| - | - | - |
| - | - | - |
| - | - | - |
| Heat Treatment |
|---|
| As-Cast or Annealing or Age Hardning |
| Mechanical Properties | |
|---|---|
| Tensile Strength in Mpa | 580 - 1100 |
| Yield Strength in Mpa | 220 - 1030 |
| Elongation in % | 2 - 40 |
| Reduction of Area in % | - |
| Hardness in HRC | 78 - 86 |
| Impact in Joule | - |
Cross Reference Table
| Material | Standard | Country | Grade Belong to the Industry |
|---|---|---|---|
| N14080 | UNS | USA | Forging, Billet, Hot rolled plate, Strip, Bar and Wire |
| - | - | - | - |
| - | - | - | - |
| - | - | - | - |
| - | - | - | - |
| - | - | - | - |
| - | - | - | - |