Material – ASTM B100 C61300
Standard Specification for Wrought Copper-Alloy Bearing and Expansion Plates and Sheets for Bridge and Other Structural Use
Group - Non-Ferrous Copper Alloy
Sub Group - ASTM B100 Wrought Copper-Alloy Bearing and Expansion Plates and Sheets for Bridge and Other
Structural Use
Application - Intended for Valve, Pump, General Engineering, Automotive and Other Industries
Grade Belongs to the Industry - Plate and Sheet
| Chemical Composition | ||
|---|---|---|
| Aluminium | Al % | 6.000 - 7.500 |
| Iron | Fe % | 2.000 - 3.000 |
| Manganese | Mn % | 0.200 max. |
| Ni + Co | Ni% + Co% | 0.150 max. |
| Phosphorus | P % | 0.015 max. |
| Lead | Pb % | 0.010 max. |
| Silicon | Si % | 0.100 max. |
| Tin | Sn % | 0.200 - 0.500 |
| Zinc | Zn % | 0.100 max. |
| Copper | Cu % | Balance |
| - | - | - |
| - | - | - |
| - | - | - |
| - | - | - |
| - | - | - |
| Heat Treatment |
|---|
| As Drawn or Stress Relieving |
| Mechanical Properties | |
|---|---|
| Tensile Strength in Mpa | 415 min. |
| Yield Strength in Mpa | 170 min. |
| Elongation in % | 10 min. |
| Reduction of Area in % | - |
| Hardness in HB | 130 min. |
| Impact in Joule | - |
Cross Reference Table
| Material | Standard | Country | Grade Belong to the Industry |
|---|---|---|---|
| C61300 | UNS | USA | Rod, Bar, Tube and Shapes |
| B111 C61300 | ASTM | USA | Tubes |
| B169 C61300 | ASTM | USA | Sheet, Strip and Bar |
| B171 C61300 | ASTM | USA | Plate and Sheet |
| F467 C61300 | ASTM | USA | Bolts, Screws and Studs |
| SB-111 C61300 | ASME | USA | Tubes |
| SB-150 C61300 | ASME | USA | Rod, Bar and Shapes |