Material – DIN 2.4116
Standard Specification for Nickel and Nickel Alloys Wires
Group - Non-Ferrous Nickel Alloys
Sub Group - DIN 2.4116 Nickel and Nickel Alloys Wires
Application - Intended for Valve, Pump, General Engineering, Automotive and other Industries
Grade Belongs to the Industry - Wire
| Chemical Composition | ||
|---|---|---|
| Carbon | C % | 0.150 max. |
| Silicon | Si % | 0.150 max. |
| Manganese | Mn % | 4.250 - 5.250 |
| Copper | Cu % | 0.250 max. |
| Iron | Fe % | 0.350 max. |
| Magnesium | Mg % | 0.150 max. |
| Sulphur | S % | 0.010 max. |
| Titanium | Ti % | 0.100 max. |
| Ni + Co | Ni% + Co% | 94.000 min. |
| - | - | - |
| - | - | - |
| - | - | - |
| - | - | - |
| - | - | - |
| - | - | - |
| Heat Treatment |
|---|
| As-Cast or Annealing or Age Hardning |
| Mechanical Properties | |
|---|---|
| Tensile Strength in Mpa | 500 min. |
| Yield Strength in Mpa | - |
| Elongation in % | 15 min. |
| Reduction of Area in % | - |
| Hardness in BHN | - |
| Impact in Joule | - |
Cross Reference Table
| Material | Standard | Country | Grade Belong to the Industry |
|---|---|---|---|
| - | - | - | - |
| - | - | - | - |
| - | - | - | - |
| - | - | - | - |
| - | - | - | - |
| - | - | - | - |
| - | - | - | - |