Material ‐ DIN EN 1706 AC ‐ 47100
Standard Specification for Aluminium and Aluminium Alloys ‐ Casting
Group - Non ‐ Ferrous Alumium Alloy
Sub Group - DIN EN 1706 Aluminium and Aluminium Alloys ‐ Casting
Application - Intended for Valve, Pump, General Engineering, Automotive and Other Industries
Grade Belongs to the Industry - Casting
| Chemical Composition | ||
|---|---|---|
| Copper | Cu % | 0.700 ‐ 1.200 |
| Iron | Fe % | 1.300 max. |
| Magnesium | Mg % | 0.350 max. |
| Manganese | Mn % | 0.550 max. |
| Nickel | Ni % | 0.300 max. |
| Silicon | Si % | 10.500 ‐ 13.500 |
| Lead | Pb % | 0.200 max. |
| Tin | Sn % | 0.100 max. |
| Titanium | Ti % | 0.200 max. |
| Zinc | Zn % | 0.550 max. |
| Chromium | Cr % | 0.100 max. |
| Other | Ot% | 0.250 max. |
| Aluminium | Al % | Balance |
| ‐ | ‐ | ‐ |
| ‐ | ‐ | ‐ |
| Heat Treatment |
|---|
| As ‐ Cast |
| Mechanical Properties | |
|---|---|
| Tensile Strength in Mpa | 240 min. |
| Yield Strength in Mpa | 140 min. |
| Elongation in % | 1 min. |
| Reduction of Area in % | ‐ |
| Hardness in HB | 70 min. |
| Impact in Joule | ‐ |
Cross Reference Table
| Material | Standard | Country | Grade Belong to the Industry |
|---|---|---|---|
| Al Si12Cu1(Fe) | ISO | International | Casting |
| EN AC ‐ 47100 | BS | British | Casting |
| EN AC ‐ 47100 | ASME | USA | Casting |
| EN AC ‐ 47100 | UNI | Italy | Casting |
| EN AC ‐ 47100 | AFNOR NF | France | Casting |
| EN AC ‐ 47100 | UNE | Spain | Casting |
| EN AC ‐ 47100 | SFS | Finland | Casting |