Material – DIN EN-1753 MC21121
Standard Specification for Magnesium and Magnesium Alloys - Ingots and Castings
Group - Non-Ferrous Magnesium Alloy
Sub Group - DIN EN-1753 Magnesium and Magnesium Alloys - Ingots and Castings
Application - Intended for Valve, Pump, General Engineering, Automotive and Other Industries
Grade Belongs to the Industry - Ingot and Casting
| Chemical Composition | ||
|---|---|---|
| Aluminium | Al % | 8.000 - 10.000 |
| Copper | Cu % | 0.200 max. |
| Iron | Fe % | 0.030 max. |
| Nickel | Ni % | 0.010 max. |
| Other | Ot% | 0.050 max. |
| Silicon | Si % | 0.300 max. |
| Zinc | Zn % | 0.300 - 1.000 |
| Magnesium | Mg % | Balance |
| - | - | - |
| - | - | - |
| - | - | - |
| - | - | - |
| - | - | - |
| - | - | - |
| - | - | - |
| Heat Treatment |
|---|
| As-Cast or Solution Treated or Fully Treated |
| Mechanical Properties | |
|---|---|
| Tensile Strength in Mpa | 140 - 235 |
| Yield Strength in Mpa | 75 - 110 |
| Elongation in % | 1 - 6 |
| Reduction of Area in % | - |
| Hardness in BHN | - |
| Impact in Joule | - |
Cross Reference Table
| Material | Standard | Country | Grade Belong to the Industry |
|---|---|---|---|
| Mg-Al9Zn | ISO | International | Bar and Wire |
| MgAl9Zn Class3 | JIS | Japan | Casting |
| EN-MC21121 | ONORM | Australia | Ingot and Casting |
| EN-MC21121 | UNI | Italy | Ingot and Casting |
| EN-MC21121 | CSN | Czech Republic | Ingot and Casting |
| EN-MC21121 | MSZ | Hungary | Ingot and Casting |
| EN-MC21121 | PN | Poland | Ingot and Casting |