Material – DIN EN 1982 CuSn15As-B
Standard Specification for Copper and Copper Alloys - Ingots and Castings
Group - Non-Ferrous Copper Alloy
Sub Group - DIN EN 1982 Copper and Copper Alloys - Ingots and Castings
Application - Intended for Valve, Pump, General Engineering, Automotive and Other Industries
Grade Belongs to the Industry - Ingot and Casting
| Chemical Composition | ||
|---|---|---|
| Aluminium | Al % | 0.010 max. |
| Arsenic | As % | 0.060 - 0.150 |
| Iron | Fe % | 0.150 max. |
| Manganese | Mn % | 0.100 max. |
| Nickel | Ni % | 0.100 max. |
| Lead | Pb % | 0.500 max. |
| Silicon | Si % | 0.020 max. |
| Tin | Sn % | 0.300 max. |
| Copper | Cu % | 83.000 - 87.500 |
| Zinc | Zn % | Balance |
| - | - | - |
| - | - | - |
| - | - | - |
| - | - | - |
| - | - | - |
| Heat Treatment |
|---|
| As-Cast |
| Mechanical Properties | |
|---|---|
| Tensile Strength in Mpa | 160 min. |
| Yield Strength in Mpa | 70 min. |
| Elongation in % | 20 min. |
| Reduction of Area in % | - |
| Hardness in HB | 45 min. |
| Impact in Joule | - |
Cross Reference Table
| Material | Standard | Country | Grade Belong to the Industry |
|---|---|---|---|
| CC760S | BS | British | Ingot and Casting |
| CB760S | ONORM | Australia | Ingot and Casting |
| CB760S | CSN | Czech Republic | Ingot and Casting |
| CB760S | AFNOR NF | France | Ingot and Casting |
| CB760S | DIN | Germany | Ingot and Casting |
| CuSn15As-B | ONORM | Australia | Ingot and Casting |
| CuSn15As-B | AFNOR NF | France | Ingot and Casting |